This
Charcoal Kiln Oxidizer was designed to incinerate heavy particulate
organic matter without fouling. This facility uses "Missouri" style
kilns to produce the basic char that
charcoal is made from. During the process of carbonizing the wood, wood
tars and oils are emitted from the kilns, which can cause fouling in
the ductwork and the incinerator. Working
closely with the plant personnel to improve the kiln productivity and
safety, Jardar Systems designed a system to resist fouling and recover
energy from the stack outlet. As can be
seen from the picture, all the organic matter is oxidized and the stack
opacity is zero. 
This 100,000 ACFM 316LSS wet scrubber was designed to
remove Taconite dust from a gas stream of a plant located in the Mesabi
range of northeastern Minnesota. Taconite is one of the most abrasive
substances found in mining operations. In the process of manufacturing
Taconite pellets from iron ore, large amounts of humid ventilation air
containing the dust are produced.The most efficient piece of air
pollution control equipment for removing the dust is a heavy duty
industrial wet scrubber as shown on the right.
|
Jardar
Systems 3266 RFD Middlesax Drive, Long Grove, IL 60047 |